Upgrading a notebook memory is a specific simple process pending that you have the right RAM and you are somewhat delicate.
There are different types of RAM, and you must choose the one that is compatible with your notebook computer. Memory is also a fragile, so you need to be very cautious when installing it. You should ensure that the laptop is turned off and disconnected from any exterior power supply. No lights should be visible.
It is a lot easier to install RAM on a laptop versus a desktop PC. Access to the memory slots is via a panel generally located in the bottom of the laptop. Once you have opened this panel with a small screwdriver you can see the existing memory. you can check the exact type of memory that your Notebook currently uses, because it is usually shown on the front of the memory strips and will be evident when you open up the memory panel.
The memory strips are generally locked in with small clips on the ends of the strips. To take out existing memory, simply flip the clips and then remove the memory strips gently from their holding place. If you are simply adding memory, and there is space available, just add the new memory, gently pushing it in to ensure it is fully seated in the slots, and then push the clips to hold the new memory in place.
Once you have replaced or added your Notebook computer memory, replace the access panel, and then screw the panel back in place. Lastly, power up the notebook, When the PC starts up, it will count the memory and tell you how much RAM is loaded on your laptop.
As long as you have right memory, the whole operation should take less than 5 minutes, you can then enjoy your faster, less crash prone laptop.